Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
Charly,
Balun Hook-Up and Signal Images - What is the Connection ? http://groups.yahoo.com/group/Shortw...a/message/9411 http://groups.yahoo.com/group/Shortw...a/message/9393 So by itself the Radio using the built-in Whip Antenna receives the 5900 kHz signal from Bucurest Radio - OK. Questions - The Basic Wire Antenna : 1 - How are you connecting the External Wire Antenna to the Radio ? 2 - Are you connecting the Wire to the Radio via the External Antenna Jack ? 3 - Are you connecting to the Wire to the Radio by 'attaching' the Wire to the Whip Antenna ? 4 - Are you using a Ground Connecting with the Wire Antenna ? Questions - The Balun and Wire Antenna : 1 - How are you connecting the Balun Wires (2) to the Radio ? 2 - Are you connecting the Balun Wires (2) to the Radio via the External Antenna Jack ? 3 - Are you connecting to the Balun Wires (2) to the Radio by 'attaching' the one Wire to the Whip Antenna and the other Wire to where ? 4 - Are you using a Ground Connecting with the Balun ? i want to know - iane ~ RHF .. Shortwave Listener Antennas = http://tinyurl.com/ogvcf http://groups.yahoo.com/group/Shortwave-SWL-Antenna/ SWL Antenna Group = http://tinyurl.com/ogvcf |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
RIGGING - The LMZ-75, SWLZ and RF Systems MLB (Magnetic LongWire Balun) | Shortwave | |||
The Eton E1 Radio and the RF Junkie "SWLZ" 9:1 Shortwave Listener's Balun with "F" Connector for RG6 (75 Ohm) Coax Cable Feed-in-Line Output | Shortwave | |||
Antenna design | Shortwave |