How can you be contacted to discuss this further?

Lisa Simpson wrote:
No, don't really know anyone that does such, I only very recently got into
this hobby . . .

"HFguy" wrote in message
news:Pnwbg.72$zg5.4@trndny04...

Do you know a tech' or ham' in your area that can do the soldering? It's
really very easy. Just make a hole in the back cover for the RCA jack
and run the coax from the jack to the oscillator circuit.

Lisa Simpson wrote:

I do not know how to solder, and my hands do not sit still well enough

to perform such exacting work; I wind up burning a circular sport 3 inches

widearound the target! I would really like to have a digital freq. display

on this unit too, but AADE does not do the actual modifications.

Go buy a good electric soldering iron,get a new stainless steel brush
too.(it looks like a toothbrush) Get some pieces of scrap wire and
practice soldering.Your local area libraries probally have some books on
the subjet too.Soldering is really very simple and easy to do.Usually,I
use an old electric wood burning tool/thingy to solder,because I like it
much better.
cuhulin

Just responded to your address below using my yahoo account. . .

"HFguy" wrote in message
news:Sexbg.719$nA2.14@trndny01...
How can you be contacted to discuss this further?

Lisa Simpson wrote:
No, don't really know anyone that does such, I only very recently got
into
this hobby . . .

"HFguy" wrote in message
news:Pnwbg.72$zg5.4@trndny04...

Do you know a tech' or ham' in your area that can do the soldering? It's
really very easy. Just make a hole in the back cover for the RCA jack
and run the coax from the jack to the oscillator circuit.

Lisa Simpson wrote:

I do not know how to solder, and my hands do not sit still well enough

to perform such exacting work; I wind up burning a circular sport 3
inches

widearound the target! I would really like to have a digital freq.
display

on this unit too, but AADE does not do the actual modifications.