WOULD YOU.........
 

Yeahhhhh,,,,, I am going back over to the Goodwill store a few times
this weel,looking for some wimmins dresses.I need to cut the light and
get me beauty sleep now.Move over,Blueberry doggy.
cuhulin

WOULD YOU.........Peter.
 

That's simply not true, Mike. I sent my 350 to TT for a minor repair
and a touchup and it was done, on time, as they promised, for less than
$100.

================================================== ======================

Peter.

i've been looking at the TT RX350D. i was wondering if you ever had the
lock-up prob? read about it on the web; 350 some times needs a re-boot/
re-start?

Father Michael.

WOULD YOU.........Peter.
 

Father Mike wrote:
That's simply not true, Mike. I sent my 350 to TT for a minor repair
and a touchup and it was done, on time, as they promised, for less than
$100.

================================================== ======================

Peter.

i've been looking at the TT RX350D. i was wondering if you ever had the
lock-up prob? read about it on the web; 350 some times needs a re-boot/
re-start?

Father Michael.



I've not encountered that, no. I had a backlight fail. Which
apparently is not an uncommon problem with early RX-350. The problem was
corrected with more substantial SMD resistors and a minor circuit
modification on subsequent units, and now, mine.

Firware is stable, and I've never encountered so much as a blip.
Updates went smoothly as well. No, it's not locked up, and believe me
when I tell you, I did my best to try to force one.

I've been so pleased with RX-350 that I sold several of my other
receivers.

And the folks at Ten-Tec couldn't have been more helpful.


p

WOULD YOU.........
 

"dxAce" wrote in message
...


mike maghakian wrote:

buy a $4000 receiver from someone who has a rating worse than
radio-mart and
can't even test it ???????????


http://cgi.ebay.com/Tentac-RX-340-HF...QQcmdZViewItem

Still at $1590.00 with about 21 hours to go.

dxAce
Michigan
USA

It's called SHILL BIDDING. Anyone who'd pay that
much for an un-tested radio DESERVES to be ass-screwed
out of their money.

WOULD YOU.........
 

dxAce wrote:

mike maghakian wrote:

buy a $4000 receiver from someone who has a rating worse than radio-mart and
can't even test it ???????????

http://cgi.ebay.com/Tentac-RX-340-HF...QQcmdZViewItem

Put your thinking cap on. This is obviously for sale by one of those outfits that cruises about looking for stuff to
sell. Probably know nothing about radio.

There is no reserve on the radio, and it is currently at $909.00.

Could be a good deal for someone who might figure that even if there is something wrong with it, they can still get it
serviced, up and running, for a very good price vs. the cost of a new one.

Receiver closed at $2575.00. Bidding was still at $1590,00 with 40 seconds to go, then the action started.

dxAce
Michigan
USA

WOULD YOU.........
 

"Capt. HentaiVideoPr0n" wrote:

"dxAce" wrote in message
...


mike maghakian wrote:

buy a $4000 receiver from someone who has a rating worse than
radio-mart and
can't even test it ???????????


http://cgi.ebay.com/Tentac-RX-340-HF...QQcmdZViewItem

Still at $1590.00 with about 21 hours to go.

It's called SHILL BIDDING.

ANY bid is a SHILL bid for many of you KOOKS.

Anyone who'd pay that
much for an un-tested radio DESERVES to be ass-screwed
out of their money.

You know about ass-screwing, don't you 'tard?

Capt... meet Eduardo...

dxAce
Michigan
USA

WOULD YOU.........Peter.
 

$350.00 is too much to spend for any kind of repair on anything.
cuhulin

WOULD YOU.........Peter.
 

wrote:

$350.00 is too much to spend for any kind of repair on anything.

Sometimes one has to spend money to make money.

dxAce
Michigan
USA

WOULD YOU.........
 

WOULD YOU.........
 

considering that I have seen 340's with 90 day waranties for less than
$3000, for this seller to buy this one for $2575 means he is a fool.



"mike maghakian" wrote in message
...
buy a $4000 receiver from someone who has a rating worse than radio-mart
and can't even test it ???????????

http://cgi.ebay.com/Tentac-RX-340-HF...QQcmdZViewItem