Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 7th 03, 01:01 AM
Kevin
 
Posts: n/a
Default alinco erw-4c data cable

is there any way of making one or converting a icom lead


  #2   Report Post  
Old September 7th 03, 11:45 AM
Phil A
 
Posts: n/a
Default

The Icom lead does the job...

"Kevin" wrote in message
...
is there any way of making one or converting a icom lead




  #3   Report Post  
Old September 7th 03, 03:32 PM
Kevin
 
Posts: n/a
Default

Ah right will download the software again as it didnt seem to work first
time round


Thx


  #4   Report Post  
Old September 8th 03, 12:07 AM
Kevin UK-138 446 user
 
Posts: n/a
Default

Ok guys just downloaded software again and still no luck
when in clone mode the radio displays ok but when i try to read all data i
get this error msg

"A communication error occurred:1"


Any idea guys this is driving me nuts

the cable is one i used on my icom r2

thx


  #6   Report Post  
Old September 8th 03, 12:59 AM
Kevin UK-138 446 user
 
Posts: n/a
Default


Com port is set to 1#
serial adapter - jack plug
i have been told that the icom lead i have will work earleir in this thread
still not 100% sure my self



  #8   Report Post  
Old September 8th 03, 09:09 AM
Kevin UK-138 446 user
 
Posts: n/a
Default

Hi Dwane

The cable i would like to use/convert is the Icom OPC-478 Cloning Cable it
has a stereo jack on one end and the oppisite end goes to comm port 1 on the
pc


kev


  #9   Report Post  
Old September 8th 03, 11:03 PM
Kevin UK-138 446 user
 
Posts: n/a
Default


Still getting the same message "A communication error occurred 1" then i
press ok then get next message "cannot find dj-x3"

But scanner screen still says OK


  #10   Report Post  
Old September 9th 03, 03:00 AM
Walt Bertram
 
Posts: n/a
Default

Not familiar with the Alinco radio, but does it require a stereo, or a
mono, plug on the cable.

Radio Shack PRO92, 93, 95 scanners require mono, and will work with a
stereo/mono adapter on the end of a cable which has a stereo plug. Such
adapters are available at Radio Shack, and other such suppliers.

Incidently, the plug is on the cable, the jack is on the radio. Plugs
are male, jacks are female :-).

Walt

Kevin UK-138 446 user wrote:

Hi Dwane

The cable i would like to use/convert is the Icom OPC-478 Cloning Cable it
has a stereo jack on one end and the oppisite end goes to comm port 1 on the
pc

kev

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
yaesu FC-20 data cable wiring Bernd Maestling Equipment 0 July 31st 03 02:55 PM
yaesu FC-20 data cable wiring Bernd Maestling Equipment 0 July 31st 03 02:55 PM
Alinco "Programming Cable" Dave Scanner 1 July 21st 03 05:21 AM


All times are GMT +1. The time now is 08:17 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017