Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 13th 03, 11:07 PM
Ron
 
Posts: n/a
Default R1155 info req

Hi, can anyone tell me if the BFO freq on this set
runs at half the IF ie 280khz before I go mad
from Ron...

  #2   Report Post  
Old October 13th 03, 11:21 PM
Gregg
 
Posts: n/a
Default

I don't know the circuit or radio, but it's a common trick to run an
oscillator a 1/2 it's intended output (use it's second harmonic) for
better spectral performance as well as oscillator loading stability.

--
Gregg
*It's probably useful, even if it can't be SPICE'd*
http://geek.scorpiorising.ca
  #3   Report Post  
Old October 18th 03, 01:40 PM
Why_Gregg
 
Posts: n/a
Default

On Mon, 13 Oct 2003 22:21:13 GMT, Gregg wrote:

I don't know the circuit or radio, but it's a common trick to run an
oscillator a 1/2 it's intended output (use it's second harmonic) for
better spectral performance as well as oscillator loading stability.


So helpful!

  #4   Report Post  
Old October 18th 03, 01:40 PM
Why_Gregg
 
Posts: n/a
Default

On Mon, 13 Oct 2003 22:21:13 GMT, Gregg wrote:

I don't know the circuit or radio, but it's a common trick to run an
oscillator a 1/2 it's intended output (use it's second harmonic) for
better spectral performance as well as oscillator loading stability.


So helpful!

  #5   Report Post  
Old October 13th 03, 11:21 PM
Gregg
 
Posts: n/a
Default

I don't know the circuit or radio, but it's a common trick to run an
oscillator a 1/2 it's intended output (use it's second harmonic) for
better spectral performance as well as oscillator loading stability.

--
Gregg
*It's probably useful, even if it can't be SPICE'd*
http://geek.scorpiorising.ca


  #6   Report Post  
Old October 13th 03, 11:46 PM
Joe McElvenney
 
Posts: n/a
Default

Hi,

Hi, can anyone tell me if the BFO freq on this set
runs at half the IF ie 280khz before I go mad
from Ron...


Yes, it does!

I guess they used the second harmonic to reduce the de-
sensitization that could happen if the BFO were at the IF
frequency and activated the AGC. It might also have helped to
reduce pulling of the oscillator by a strong IF signal.

A great receiver for its day although the build-state was
typical Marconi of the time. I think however, that the average
operation life of a Lancaster precluded the receiver ever
reaching old age.


Cheers - Joe


  #7   Report Post  
Old October 14th 03, 02:05 AM
Engineer
 
Posts: n/a
Default


"Joe McElvenney" wrote in message
...
Hi,


(snip)

A great receiver for its day although the build-state was
typical Marconi of the time. I think however, that the average
operation life of a Lancaster precluded the receiver ever
reaching old age.

Cheers - Joe


It's been a while since I passed these up in Lyle Street, London, UK, at "10
quid each" in the 1950's (some new, big mistake!) BTW, didn't they have one
of the best slow motion drives going at the time?

Cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"



  #8   Report Post  
Old October 14th 03, 06:53 PM
Claudia & Reed Park
 
Posts: n/a
Default



Engineer wrote:

Cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"


Roger. What happened during the recent election ? My brother and
two sisters say that they didn't vote Liberal, so want to know who did ?

Regards
Reed - VE1NU



-------------------------------------------------

Looking for information on the following

Marconi SMR-3 receiver
Northern Electric R8119A receiver and
KING, Director KX150 dual comms and nav receiver
and
Rogers Majestic (Motorola design)trunk mount FM radiotelephone
1949 RCAF Receiver Type CPA 8333 A/12 volt
Ref. No. 10EU/5820-21-801-4183
1949 RCAF Transmitter Type CPA 8329 D/12 volt
Ref. No. 10EU/5820-21-801-4182
  #9   Report Post  
Old October 14th 03, 06:53 PM
Claudia & Reed Park
 
Posts: n/a
Default



Engineer wrote:

Cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"


Roger. What happened during the recent election ? My brother and
two sisters say that they didn't vote Liberal, so want to know who did ?

Regards
Reed - VE1NU



-------------------------------------------------

Looking for information on the following

Marconi SMR-3 receiver
Northern Electric R8119A receiver and
KING, Director KX150 dual comms and nav receiver
and
Rogers Majestic (Motorola design)trunk mount FM radiotelephone
1949 RCAF Receiver Type CPA 8333 A/12 volt
Ref. No. 10EU/5820-21-801-4183
1949 RCAF Transmitter Type CPA 8329 D/12 volt
Ref. No. 10EU/5820-21-801-4182
  #10   Report Post  
Old October 14th 03, 02:05 AM
Engineer
 
Posts: n/a
Default


"Joe McElvenney" wrote in message
...
Hi,


(snip)

A great receiver for its day although the build-state was
typical Marconi of the time. I think however, that the average
operation life of a Lancaster precluded the receiver ever
reaching old age.

Cheers - Joe


It's been a while since I passed these up in Lyle Street, London, UK, at "10
quid each" in the 1950's (some new, big mistake!) BTW, didn't they have one
of the best slow motion drives going at the time?

Cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What's the best Source of Info On Rhombics? MailfrmPA Antenna 6 November 29th 04 05:46 PM
Lattin antenna.............more info sources Lee Carkenord Antenna 33 April 23rd 04 06:03 PM
Gotham Antenna info needed Keyboard In The Wilderness Antenna 4 December 5th 03 04:09 PM
Vee Beam info needed W5DXP Antenna 5 August 6th 03 07:39 AM
Looking for info on a good triband antenna Elmer E Ing Antenna 3 July 27th 03 04:27 PM


All times are GMT +1. The time now is 09:47 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017