| Home |
| Search |
| Today's Posts |
|
|
|
#1
July 19th 06, 10:58 AM
posted to rec.radio.shortwave
|
|||
|
|||
SSB on the sangean ats-505
How does the SSB work on the ats-505?.
|
|
#2
July 20th 06, 04:04 AM
posted to rec.radio.shortwave
|
|||
|
|||
|
SSB on the sangean ats-505
adam wrote: How does the SSB work on the ats-505?. Poorly - which led me to trade it away. The 1 khz tuning scheme on that radio is one of the goofiest designs ever (surpassed only by the Degen 1103 volume control adventure). |
|
#3
July 20th 06, 04:17 AM
posted to rec.radio.shortwave
|
|||
|
|||
|
SSB on the sangean ats-505
adam wrote: How does the SSB work on the ats-505? Poorly - which led me to trade it away. The 1 khz tuning scheme on that radio is one of the goofiest designs ever (surpassed only by the Degen 1103 volume control adventure). |
|
#4
July 20th 06, 03:35 PM
posted to rec.radio.shortwave
|
|||
|
|||
|
SSB on the sangean ats-505
adam wrote: How does the SSB work on the ats-505?. If you're asking _whether_ it works, it's not sophisticated, but it _does_ work well enough to tune in an SSB signal and understand it. I've used it to listen to radio amateurs, military and other stations just fine -- its bandwidth is too wide for serious communications work. As to how to use it: To select SSB, you use the FM - FM Stereo/ SSB - AM switch on the right side, and fine tune with the clarify control, also on the right side. Be sure to start out with the clarify thumbwheel in the center position (there's a notch that you can feel when it's centered). The tuning LED turns red to let you know that SSB is selected. You push in on the tuning knob (left side) to change from the normal 5 kHz to 1 kHz tuning steps. Northe N6KO |
|
#5
July 28th 06, 04:20 AM
posted to rec.radio.shortwave
|
|||
|
|||
|
SSB on the sangean ats-505
Northe Osbrink wrote:
adam wrote: How does the SSB work on the ats-505?. If you're asking _whether_ it works, it's not sophisticated, but it _does_ work well enough to tune in an SSB signal and understand it. I've used it to listen to radio amateurs, military and other stations just fine -- its bandwidth is too wide for serious communications work. As to how to use it: To select SSB, you use the FM - FM Stereo/ SSB - AM switch on the right side, and fine tune with the clarify control, also on the right side. Be sure to start out with the clarify thumbwheel in the center position (there's a notch that you can feel when it's centered). The tuning LED turns red to let you know that SSB is selected. You push in on the tuning knob (left side) to change from the normal 5 kHz to 1 kHz tuning steps. Northe N6KO cheers mate ill try it tonight. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sangean 404 | Shortwave | |||
| Sangean ATS-909 vs. Sony ICF-7600GR | Shortwave | |||
| KA1102 vs. Sangean 606 vs. Tecsun PL230 | Shortwave | |||
| Sangean Problems? | Shortwave | |||
| Sangean 803 / DX 440 Group on Yahoo - 1 year old! | Shortwave | |||
Hybrid Mode
