| Home |
| Search |
| Today's Posts |
|
|
|
#1
May 17th 08, 09:00 PM
posted to rec.radio.shortwave,rec.radio.swap,rec.radio.amateur.equipment
|
|||
|
|||
Need Info on the YK-88S2 IF Filter ? -for- Kenwood R-5000 Receiver
In article
, RHF wrote: YK-88A-1 = 6 kHz "Optional" AM Filter - Plug-In YK-88A = 6 kHz "Optional" AM Filter - Solder-In My old TS430 had the solder-in filters. The newer TS-690 (450) has plug-in filters. I understood that the only difference between older and newer YK-88 series filters was the circuit board, denoted by the -1 suffix. So, if you need a solder-in YK-88SN for example, you should be able to unsolder the filter from the YK-88SN-1 circuit board and use that. Are there some matching components on the circuit board that I missed? Fred K4DII |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
