Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]() "mike" wrote in message ... private wrote: I got a replacement NiMH for a NiCad pack for a HT. When I charge it it opens up. After it cools down it is fine. It is an Alinco quick charger and it is almost impossible to make the charger light for trickle green. Sounds like you're overcharging it. NiMH and NiCd use different charge termination schemes. While it is possible to design a charger for both, older NiCd chargers may not ever terminate with a NiMH battery. Might want to take this up with the battery vendor. mike Just to clarify, what you are probably seeing is the battery packs internal thermal overload opening up from overcharging. A few cycles of this will likely destroy the pack. jak -- Bunch of stuff For Sale and Wanted at the link below. laptops and parts Test Equipment 4in/400Wout ham linear amp. Honda CB-125S 400cc Dirt Bike 2003 miles $550 Police Scanner, Color LCD overhead projector Tek 2465 $800, ham radio, 30pS pulser Tektronix Concept Books, spot welding head... http://www.geocities.com/SiliconValley/Monitor/4710/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
OT EMI problem with stove and internet connection | Homebrew | |||
Realistic Pro-2006 Low battery beep problem | Scanner | |||
Loose connection inside D cell battery | Homebrew | |||
Loose connection inside D cell battery | Homebrew | |||
Amateur Radio Newsline™ Report 1382 – February 6, 2004 | Shortwave |