FOR SALE -- a nice QRP station:

Yaesu FT-817 transceiver, s/n 0K020304
with all standard accessories, box, manual
with YF-122C CW filter installed
with Maha FNB-72 battery, 9.6v @ 1700 mAH
NO DAMAGE OR REPAIR HISTORY

LDG Z-11 antenna tuner (factory assembled)
with box and manual
One-Touch-Tune interface factory mod kit installed
external ground binding post neatly added to rear panel
power connector changed to different size of same type
original connector included so can be changed back

W4RT Electronics One-Touch-Tune module

Homebuilt DC power distribution box
2" x 2.5" x 3.5" painted aluminum Bud box
nice long input cable with banana plugs
three separately-fused banana jack outputs

Homemade brackets to bolt FT-817 and Z-11 together
using only stock hardware and mounting holes
no mods to either unit required to use these

Homemade tilt stand
made from upside-down CB radio mounting bracket
not fancy, but does the job quite well

Boom mic / stereo headset
with all necessary cables
mic element is electret condensor type
with homebuilt PTT switchbox
uses stock Yaesu mic cord (detaches from mic head)

SEE COLOR PHOTOGRAPH AT THIS URL:
http://www.qsl.net/k5dh/sm6_gear.jpg

Keyer, paddle, and clock shown in pic are NOT included.
This is nice, clean gear that has not been abused. It
has been transported only in a padded carrying case. I
am a non-smoker. Sorry, no trades (I have a new rig to
pay for!). To be sold as a package deal only. This is
a complete station that needs only a power supply, code
key, and suitable antenna to go on the air! The LDG
antenna tuner does a wonderful job loading a 35 foot
piece of insulated hookup wire as an antenna on all
bands from 80m through 10m (using a wire counterpoise).

PACKAGE PRICE $650.00 FIRM. Buyer pays shipping.

Uzytkownik "K5DH" napisal w wiadomosci
...
FOR SALE -- a nice QRP station:

Yaesu FT-817 transceiver, s/n 0K020304
with all standard accessories, box, manual
with YF-122C CW filter installed
with Maha FNB-72 battery, 9.6v @ 1700 mAH
NO DAMAGE OR REPAIR HISTORY

LDG Z-11 antenna tuner (factory assembled)
with box and manual
One-Touch-Tune interface factory mod kit installed
external ground binding post neatly added to rear panel
power connector changed to different size of same type
original connector included so can be changed back

W4RT Electronics One-Touch-Tune module

Homebuilt DC power distribution box
2" x 2.5" x 3.5" painted aluminum Bud box
nice long input cable with banana plugs
three separately-fused banana jack outputs

Homemade brackets to bolt FT-817 and Z-11 together
using only stock hardware and mounting holes
no mods to either unit required to use these

Homemade tilt stand
made from upside-down CB radio mounting bracket
not fancy, but does the job quite well

Boom mic / stereo headset
with all necessary cables
mic element is electret condensor type
with homebuilt PTT switchbox
uses stock Yaesu mic cord (detaches from mic head)

SEE COLOR PHOTOGRAPH AT THIS URL:
http://www.qsl.net/k5dh/sm6_gear.jpg

Keyer, paddle, and clock shown in pic are NOT included.
This is nice, clean gear that has not been abused. It
has been transported only in a padded carrying case. I
am a non-smoker. Sorry, no trades (I have a new rig to
pay for!). To be sold as a package deal only. This is
a complete station that needs only a power supply, code
key, and suitable antenna to go on the air! The LDG
antenna tuner does a wonderful job loading a 35 foot
piece of insulated hookup wire as an antenna on all
bands from 80m through 10m (using a wire counterpoise).

PACKAGE PRICE $650.00 FIRM. Buyer pays shipping.