Home |
Search |
Today's Posts |
#6
|
|||
|
|||
I guess you'd have to actually pull over and program the radio....
"Dan/W4NTI" w4nti@get rid of this mindspring.com wrote in message link.net... "Ralph Mowery" wrote in message ink.net... "Hamguy" wrote in message ... http://www.hamwave.com/cgi-bin/index...iewnews&id=475 Talking with a couple of other repeater groups and my own opinion is the board of the SERA overstepped its bounds by not asking for a pole of repeater owners. As one of the people that keep up a repeater I do not like the tone requirement. I had to put a tone requirement on for a while because of some paging transmitter that had a spur on the repeater input and it took a while to get that thing off the air. If they were going to require a tone , it should have been one of two tones. One for the 30 khz splits and another for the 15 kc splits. That would eliminate the need to try to find a tone for a repeater for travelers. The transceivers have had tone boards in them for so long that if you are using a rig that old you should get a new one :-) I don' t think that the cost should be an argument against the requirement. I have been involved with the repeaters for over 25 years incase anyone cares about my background with the repeater systems. de KU4PT I can see plus and negative aspects of pl tone on ham machines. One of the major negatives is for the travelers.. Ever try to program a rig while mobile? Dan/W4NTI |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HELP: 2 meter repeater intermod problem from pager transmitters | General | |||
HELP: 2 Meter Repearter intermod from 2 Pager transmitters near repeater site | Equipment | |||
HELP: 2 Meter Repearter intermod from 2 Pager transmitters near repeater site | Equipment | |||
CW Testing Question | Policy | |||
30 Steps for all New Hams | Policy |