| Home |
| Search |
| Today's Posts |
|
#4
December 19th 04, 04:15 AM
|
|||
|
|||
"jsnyder" wrote in message nk.net...
Bill Turner wrote: On 17 Dec 2004 06:40:02 -0800, wrote: Do not have power cord and no way of testing so being sold strictly AS-IS. I have no idea if it works? __________________________________________________ _______ The Red Flag is raised. Caveat emptor. How hard is it to get a power cord and turn it on? -- Bill W6WRT Actually, something that old probably uses the old 3 pin round plug that vintage HP equipment also uses. Which Belden still has in production, and any good wire and cable distributor can sell you. For big bucks. IIRC, Tek used a standard AC connector back than, and Fairchild often copied the competition products, more likely Tek than HP. On the other hand, it might have one of those 3 wire small locking AC connectors favored by some manufacturers back then which really are difficult to find (outside my junk box, anyway). -- Crazy George Remove N O and S P A M imbedded in return address |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: Agilent 54622A 2-channel 100 MHz Oscilloscope **PRICE REDUCED** | Swap | |||
| FS: Agilent 54622A 2-channel 100 MHz Oscilloscope | Swap | |||
| FS: OSCILLOSCOPE TEKTRONIX MODEL 547 | Swap | |||
| FS: OSCILLOSCOPE TEK MODEL 547 | Boatanchors | |||
Threaded Mode
