This Icom IC T2A is an HT. It is in great condition with no scratches.
I will include a brand new battery pack 194 (takes 8
alkaline,rechargeable,NI-CD none included) & original manual. mods at
mods.dk 109.99 shipping included.

Im willing to trade for a mobile 2m transceiver made after 1997 by
ICOM,Yaesu,or Kenwood.


If your interested please email.




Detailed Specifications
GENERAL

Frequency Coverage:
Tx: 140-150* MHz; Rx: 136-174* MHz (*144-148 guaranteed)
Mode: FM (F3, F2)
Current Drain (at 9.6 V DC):
Transmit (4.5 W): 1.8 A max; Transmit (1 W): 1.0 A max
Receive (power saved): 25 mA; (standby): 65 mA (typ.); (rated audio):
150 mA (typ.)
Frequency stability: =B1 10 ppm (0=B0C to +50=B0C)
Usable Temperature Range: -10=B0C to +60=B0C; +14=B0F to +140=B0F.
Antenna connector: BNC (50 ohms)
Number of memory channels: 43 (40 regular, 2 scan edges and 1 call)
Acceptable power supply: 9.6 V DC (negative ground) (supplied Ni-Cd
cells)
Frequency resolution: 5 kHz and 12.5 kHz
Dimensions: (mm/in): 58(W) x 140.5(H) x 32(D) mm; 2.32(W) x 5.5(H) x
1=2E32(D) in
Weight (w/ant. and battery): 420 g (14.8 oz.)
Transmitter

Output power (at 9.6 V DC): 4.5 W or 1 W (typical)
Modulation system: Variable reactance frequency modulation
Max. frequency deviation: =B15.0 kHz
Spurious emissions: Less than -60 dB
External mic connector: 3-conductor, 2.5 (d) mm (1/10")/2000 ohms
Receiver

Receive system: Double conversion superheterodyne
Intermediate frequencies:
1st: 30.85 MHz
2nd: 450 kHz
Sensitivity (for 12 db SINAD): 0.18 =B5V
Squelch sensitivity (at threshold): 0.18 =B5V
Selectivity: More than 15 kHz/-6 dB, Less than 30 kHz/-60 dB
Spurious and image rejection: 60 dB (typical) (except 2nd and 1/2
image)
Audio output power (at 9.6 V DC): 350 mW (typical at 10% distortion
with an 8 ohm load)
External speaker connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohms