| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
I have a W4RRY battery booster and it works. It is useful to extract
the useful charge out of a lead-acid battery. I have an FT-857D, and that gives up at about 11.5V... long before my marine battery is out of useable charge. The battery booster fixes this... of course, if your rig will run properly down to 10.5V, don't use it. It will probably increase your battery drain. Dan |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| R-390A: feeding oscillator tube heaters in DC, w/o regulator tube? | Boatanchors | |||
| 'Radio Spares' High Power Voltage Regulator spec ? | Homebrew | |||
| WTD--Source for LM325H or SG2501 dual voltage regulator IC | Homebrew | |||
| Voltage Regulator Question | Boatanchors | |||
| FS: GE MASTR II 10-Volt Regulator Card | Swap | |||