Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old March 26th 07, 01:38 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Mar 2007
Posts: 3,521
Default al coax

Uncle Peter wrote:
Aluminum has good conductivity. Before the corrugated
copper lines became popular Times Wire made an
Alumafoam cable with an aluminum sheath for many
years. We still have some runs in service at several of
my work locations..


Aluminum is used extensively in cable TV coax.
--
73, Cecil http://www.w5dxp.com
  #2   Report Post  
Old March 26th 07, 02:55 AM posted to rec.radio.amateur.antenna
art art is offline
external usenet poster
 
First recorded activity by RadioBanter: Sep 2006
Posts: 1,188
Default al coax

On 25 Mar, 17:38, Cecil Moore wrote:
Uncle Peter wrote:
Aluminum has good conductivity. Before the corrugated
copper lines became popular Times Wire made an
Alumafoam cable with an aluminum sheath for many
years. We still have some runs in service at several of
my work locations..


Aluminum is used extensively in cable TV coax.
--
73, Cecil http://www.w5dxp.com


That is correct Cecil but they are using a insulator instead of air
because of moisture getting in. The coax is also covered with plasic
which with the
inside insulation makes it less liable to kink or attack by ground
alkali or moisture.
Actually some of the older air insulated coax did not have a plastic
covering but these were changed out when HDTV entered the mix.
The air filled coax makes useful parts for antennas, you apply a
voltage
to the inner wire and the heat allows the spacers to soften and
separate from the outer aluminum. The outer aluminum tubing is thicker
than the norm so it can be put into use in several ways. Couplings are
hard to get unless
you manage to get some when the coax is changed out, the center wire
is solid so it is not as easy to join as corregated copper types which
are tubular in form allowing for a conductive rod to be pushed into
the joining ends and then sliding a copper tube over the outer
corregation before soldering
Art

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Coax Connectors, Adapters & Bulk Coax Cable AAA RF Products Swap 1 December 20th 06 03:13 AM
Coax To Coax Noise transfer ? Robert11 Antenna 2 March 18th 06 09:16 PM
Coax To Coax Noise Transfer ? Robert11 Shortwave 5 March 13th 06 10:05 PM
Skywire coax cable vs. regular coax cable Jack Antenna 6 November 1st 04 04:04 PM
FS:RG8X 18 FT LENGTH COAX WITH COAX CONNECTOR Kb9igg Swap 0 October 31st 03 04:54 PM


All times are GMT +1. The time now is 01:59 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017