Home |
Search |
Today's Posts |
#11
|
|||
|
|||
Cheap n Easy Dipole Supports
Highland Ham wrote:
You might not need that tree,but instead stiffen the 2 TV masts,by fitting (in the middle of each mast) 2 outriggers perpendicular to the mast in the same vertical plane in line with the antenna. You then connect the free ends of the outriggers with both top and bottom of the mast using steel wire + tensioners. A friend of mine used the following technique at the corner of his property using three guy wires. (fixed font) \\------------------------------------- |\\ Antenna | \\ | \\ | \\ | \\Pole | \\ |Guy \\ | \\ +--------\\---------------Earth-------- \\ \\ -- 73, Cecil http://www.w5dxp.com |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
what are you using for dipole supports | Antenna | |||
Workman BS-1 Dipole Antenna = Easy Mod to make it a Mini-Windom Antenna ! | Shortwave | |||
Intrusion system, *Easy* & *Cheap-to-build* plans, need | Equipment | |||
Building a cheap easy cb antenna | Antenna | |||
IC-208: easy way for easy install/remove the front panel? | Equipment |