Home |
Search |
Today's Posts |
#19
![]() |
|||
|
|||
![]()
Lumpy wrote:
I'd only be guessing. Perhaps the 5K resistor(s) are part of the 'float'. What kind of signal are you going to transmit if you aren't using the mic? The original use for the device was to transmit from someone speaking to someone who was hard of hearing. Assistive listening is what it's called, I believe. The same company offers essentially the very same product WITH the antenna for sending a progam feed from an audio mixer to the producer or director during a film or video shoot. That's my need. I'm simply patching the output of my portable mixer into the existing mic jack on the unit. I'm doing away with the 48" extended mic cable and the antenna that is part of it. Holding out 4' of wire will not work for my needs. I need to use a fixed antenna. Will any antenna designed for 75-76mhz work? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
" ARC-5 " Transmitter Antenna Matching. | Boatanchors | |||
Ramsey FM BCB transmitter & antenna FS | Swap | |||
Transmitter tuning, antenna, etc | Homebrew | |||
Transmitter tuning, antenna, etc | Homebrew |