LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old August 6th 08, 08:21 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Dec 2007
Posts: 69
Default Can I manually adjust my gain?

In article
,
Krys wrote:

I guess that is why I assumed it was maybe not enough gain.
The antenna outside is connected to the receiver by a RG58 cable. It
is only covered in electrical tape at the connection. It was rusty but
I have changed that all and the signal is the same.


There is your problem, right there.... RG-58 is not really very good at
VHF Frequencies in lengths longer than 25 Ft. You should get some good
cable, like Beldon 9913 or LMR400 and have someone who knows how to
install the proper connectors on it, do the work, of replacing the
Feedline. I suspect your losing over 50% of your signal in the Feedline
and connectors.

--
Bruce in alaska
add path after fast to reply
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adjust a Comet GP-6? Ken Bessler Antenna 0 April 8th 05 02:00 AM
ATAS-100 can't tune manually kernelkole Antenna 2 January 23rd 05 01:01 AM
FA Adjust-A-Volt 15 Amp Randylands Equipment 0 October 1st 04 06:10 PM
FA Adjust-A-Volt 15 Amp Randylands Equipment 0 October 1st 04 06:10 PM
FA Adjust-A-Volt 15 Amp Randylands Equipment 0 October 1st 04 06:10 PM


All times are GMT +1. The time now is 08:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017