Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
"JB" wrote in
: "Ed" wrote in message . 192.196... I know this is slightly off topic, but since I am intending to run some RF cable in the conduit, and since there are a lot of intelligent hams on this group, I will proceed anyway: Last year at the beginning of construction of a new house I buried about 50 feet of 3/4" Sched. 40 PVD between the house and a location on the property perimeter. Now that I am ready to use it, I can not locate the perimeter end.... it is somewhere in about a 10' area, and the end curves up to probably about a foot underground. The ground is nearly pure sand, and is well landscaped now to the point that I do not want to randomly dig it up. The end terminated in an elbow curving up and is well duct taped shut. Can anyone suggest a method or equipment I might use to locate that far end? Tnx. Ed K7AAT Stab an antenna rod down until you find it. A definate consideration.... since the ground is sand. If the antenna rod doesn't just bend around the conduit... may just work. Tnx. Ed |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Locating the source of a number station | Shortwave | |||
Antenna cables in metallic conduit? | Antenna | |||
Underground Bases | Shortwave | |||
Pulling Cable in Conduit | Antenna | |||
Underground antennas | Shortwave |