Home |
Search |
Today's Posts |
#23
|
|||
|
|||
On Thu, 31 Jul 2003 17:07:10 -0700, wrote:
Given that a 1dB change is NOT SUSPOSED to be noticed (without a meter, in hearing, sight, ect. ), anyhow, Just what would be the Noticeable effect of / = .1 dB in the real world ? Would , say, 2/10's really kill you, or 1/100th dB extra get you that last DXCC country? As I say, am very cynical when ANYTHING gets into these kinds of numbers! Jim NN7K KB7QHC wrote: ------------------------------------------------- 50:12.5 Ohm with an insertion loss of around 0.1dB or less over the interval of 100KHz to 30MHz. AND THAT IS NOT THE BEST EXAMPLE OF LOW LOSS! 73's Richard Clark, KB7QHC Hi Jim, Cynical? This 0.1dB corresponds to about 2% error from perfect where too many think that 5% error is the worst they have to suffer from making a power measurement with their Bird (which actually doesn't do nearly that well in the first place due to these accumulations of error). It doesn't take long for error to accumulate to the 10's of percent where you couldn't convince the bench tech that he has too many places of precision in his pronouncement of measuring 104.5W (when it was in fact closer to somewhere between 85W to 115W). I can well anticipate the "so what?" rebuttal. "Who needs 5% accuracy?" being another. The general rule of thumb demands that your standard exhibit 3 times the accuracy of the instrument being calibrated (the Bird is already dead on arrival using this 0.1dB loss, if it were not characterized already). With an out of whack Bird, you barely qualify any power measurement to within 15% (and there are more sources of error than the BalUn used to isolate the Bird). Again, I am being generous with the 3 times rule (professionals generally seek 5 times and are more comfortable with 10 times). But this is all really the provence of the professional Metrologist, not the Amateur. For the Bench Tech that confidently made the 104.5W measurement (not knowing it was in fact closer to 60W) would hardly know it through contacts where they barely noticed the less than 1 S-Unit difference. Returning to this 0.1dB, it also represents a heat burden of 20W (or more, I am being generous) for each 1KW passing through. This is a lot of heat for small packages carelessly regarded as being trivial (after-all, who can see 0.1dB on their S-Meter?). There have been more than single reports of Hams writing here in astonishment of their BalUns exploding. Blame the BalUn seems to be a popular ballad played to that audience. Others pronounce with hushed tones of reverence remonstrating mankind for drifting from the true path of the air wound BalUn (or choke, what will you) mindless of the same loss, but gratified through ignorance of the greater heat mass. This 0.1dB in the wrong hands is clearly an example of extravagant dismissal or myopic attention. And speaking of hands, how long would you consider it trivial if you had to hold onto the sucker for 20 seconds? 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SGC Tuners with Dipoles ? | Antenna | |||
Great Homebrew Antenna Roundup -- Hundreds To Choose From | Antenna |