| Home |
| Search |
| Today's Posts |
|
#2
April 27th 09, 09:54 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
NEC2 - Correcting for element taper on a loaded element?
On Mon, 27 Apr 2009 12:05:37 -0700 (PDT), Scott M
wrote: How can I calculate a taper correction for a loaded element? Hi Scott, It sounds like you have more problems than taper if your 40M antenna is resonating at 11 MHz. The clue appears to be in the word "loaded element." 73's Richard Clark, KB7QHC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| NEC2 model of 40m loaded cubical quad | Antenna | |||
| TA-33jr smaller element stuck in larger element. | Antenna | |||
| Spacing and Element order for 6 element 10 meter yagi | Antenna | |||
| No More Element 1 | CB | |||
| D-104 element | Swap | |||
Threaded Mode
