| Home |
| Search |
| Today's Posts |
|
#3
April 27th 09, 10:20 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
NEC2 - Correcting for element taper on a loaded element?
I meant without the loads (inductors) in place. Regardless if they
are in the model or not, the model isn't being converted to a constant diameter. -Scott On Apr 27, 4:54*pm, Richard Clark wrote: On Mon, 27 Apr 2009 12:05:37 -0700 (PDT), Scott M It sounds like you have more problems than taper if your 40M antenna is resonating at 11 MHz. * |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| NEC2 model of 40m loaded cubical quad | Antenna | |||
| TA-33jr smaller element stuck in larger element. | Antenna | |||
| Spacing and Element order for 6 element 10 meter yagi | Antenna | |||
| No More Element 1 | CB | |||
| D-104 element | Swap | |||
Threaded Mode
