Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 3rd 09, 03:45 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
Default radio antenna designed to pick up a specific station

TefJlives wrote:
Hello all,

There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the right
direction?

Greg


What do you have for an antenna now and what is your "normal radio".


--
Jim Pennino

Remove .spam.sux to reply.
  #2   Report Post  
Old June 3rd 09, 05:01 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2009
Posts: 4
Default radio antenna designed to pick up a specific station

On Jun 3, 10:45*am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".

--
Jim Pennino

Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.
  #3   Report Post  
Old June 3rd 09, 05:30 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
Default radio antenna designed to pick up a specific station

TefJlives wrote:
On Jun 3, 10:45Â*am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".

--
Jim Pennino

Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.


Just about any antenna will be better than that if you mount up in the
air.

The trick will be connecting it to the radio if there isn't an existing
connector for an external antenna.


--
Jim Pennino

Remove .spam.sux to reply.
  #4   Report Post  
Old June 3rd 09, 08:32 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2009
Posts: 4
Default radio antenna designed to pick up a specific station

On Jun 3, 12:30*pm, wrote:
TefJlives wrote:
On Jun 3, 10:45*am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".


--
Jim Pennino


Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.


Just about any antenna will be better than that if you mount up in the
air.

The trick will be connecting it to the radio if there isn't an existing
connector for an external antenna.

--
Jim Pennino

Remove .spam.sux to reply.


How can you connect a better antenna to a radio like this? I don't
mind taking it apart a bit.
  #5   Report Post  
Old June 3rd 09, 09:00 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
Default radio antenna designed to pick up a specific station

TefJlives wrote:
On Jun 3, 12:30Â*pm, wrote:
TefJlives wrote:
On Jun 3, 10:45Â*am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".


--
Jim Pennino


Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.


Just about any antenna will be better than that if you mount up in the
air.

The trick will be connecting it to the radio if there isn't an existing
connector for an external antenna.

--
Jim Pennino

Remove .spam.sux to reply.


How can you connect a better antenna to a radio like this? I don't
mind taking it apart a bit.


Likely the simplest thing to do is open it up and find the connection
to the existing antenna, then add a connector wired to the same place.


--
Jim Pennino

Remove .spam.sux to reply.


  #6   Report Post  
Old June 4th 09, 04:13 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Apr 2008
Posts: 543
Default radio antenna designed to pick up a specific station

How can you connect a better antenna to a radio like this? I don't
mind taking it apart a bit.


Likely the simplest thing to do is open it up and find the connection
to the existing antenna, then add a connector wired to the same place.

Use the TV antenna.
It won't matter too much if you use twinlead or coax. You can just put a "
F" connector or screw terminals into the radio as above. I prefer to use a
300 ohm balun from the 75 ohm coax for isolation though because of the
possibility of AC leakage to the TV chassis.

  #7   Report Post  
Old June 3rd 09, 09:04 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2008
Posts: 133
Default radio antenna designed to pick up a specific station


"TefJlives" wrote in message
...
On Jun 3, 12:30 pm, wrote:
TefJlives wrote:
On Jun 3, 10:45 am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really like.
Unfortunately, it barely comes in, and sometimes doesn't at all. I
would like to build an antenna which is designed specifically for
this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the
right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".


--
Jim Pennino


Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.


Just about any antenna will be better than that if you mount up in the
air.

The trick will be connecting it to the radio if there isn't an existing
connector for an external antenna.

--
Jim Pennino

Remove .spam.sux to reply.


How can you connect a better antenna to a radio like this? I don't
mind taking it apart a bit.

Hi Greg

If you are willing to construct the Yagii, it would be possible you can
couple it to your BoomBox by looping the "twisted pair" from the yagii
around the case of the radio. Maybe you could experiment with twisting the
twisted pair around the antenna you now pull out for the VHF range. It is
possible that you will see some improvement by making a circular loop with
the wires in the twisted pair and position the loop near the present (pull
out) antenna.

Jerry KD6JDJ


  #8   Report Post  
Old June 10th 09, 09:20 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Aug 2008
Posts: 12
Default radio antenna designed to pick up a specific station

On Wed, 03 Jun 2009 20:04:28 +0000, Jerry wrote:

"TefJlives" wrote in message
...
On Jun 3, 12:30 pm, wrote:
TefJlives wrote:
On Jun 3, 10:45 am, wrote:
TefJlives wrote:
Hello all,


There is a particular station in my area, 105.1, that I really
like. Unfortunately, it barely comes in, and sometimes doesn't at
all. I would like to build an antenna which is designed
specifically for this
station and which can somehow plug into my normal radio. I know
nothing about this subject. Could someone please point me in the
right
direction?


Greg


What do you have for an antenna now and what is your "normal radio".


--
Jim Pennino


Remove .spam.sux to reply.


A piece of junk boombox. Emerson Model PD6607. The antenna is the
antenna sticking out the top of it.


Just about any antenna will be better than that if you mount up in the
air.

The trick will be connecting it to the radio if there isn't an existing
connector for an external antenna.

--
Jim Pennino

Remove .spam.sux to reply.


How can you connect a better antenna to a radio like this? I don't mind
taking it apart a bit.

Hi Greg

If you are willing to construct the Yagii, it would be possible you
can
couple it to your BoomBox by looping the "twisted pair" from the yagii
around the case of the radio. Maybe you could experiment with twisting
the twisted pair around the antenna you now pull out for the VHF range.
It is possible that you will see some improvement by making a circular
loop with the wires in the twisted pair and position the loop near the
present (pull out) antenna.

Jerry KD6JDJ


In the late 60s I built a 40-50 foot Yagi in the attic tuned to WFMT.
I used twinlead for the driven element and wires or metal tape suspended
by string anchored to handy rafters. Over a very narrow frequency range
it had enough gain over a regular FM Yagi I could listen in stereo instead
of mono. I used the information in Orr's VHF Antenna book to get the
element lengths and spacing.

I wonder if that thing is still up in that attic - if the apartment
building is still there.



--
Chuck Forsberg www.omen.com 503-614-0430
Developer of Industrial ZMODEM(Tm) for Embedded Applications
Omen Technology Inc "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231 FAX 629-0665
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Specific Antenna Dale1 Scanner 1 November 21st 08 07:47 PM
HD radio application specific integrated chip sets are yet to be found Telamon Shortwave 5 July 14th 08 12:47 PM
Beginner Cant Pick up a Single Station in San Francisco Mike Chambers Shortwave 19 December 29th 06 05:52 AM
Why does my police scanner pick up this FM broadcast station on WFM? It does not pick up any other stations. [email protected] Scanner 9 April 17th 05 01:54 AM
Radio specific battery charging question Sanjaya Shortwave 8 February 6th 04 09:02 PM


All times are GMT +1. The time now is 09:20 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017