On Nov 4, 10:09*pm, steveeh131047 wrote:
An L network match either RloadRgen or RloadRgen, depending on which
side the shunt element is on.

It's not quite that simple. For example, a load of 5+j30 requires the
same L-match configuration to match to 50 Ohms as does 500+j30: shunt
C at the Load end in both cases.

Steve G3TXQ

Conversely, a load of 10+j22 needs the shunt C across the load,
whereas 10+j18 needs shunt C across the generator.

Steve G3TXQ