| Home |
| Search |
| Today's Posts |
|
#12
November 15th 10, 07:26 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Matching antenna to crystal radio
On Mon, 15 Nov 2010 09:59:06 -0600, "amdx" wrote:
Put an alligator clip on the antenna lead and run it down the tank to find max volume, then clip it on. Use a fork to scoop water out of a glass to satisfy your thirst. I will work, just not well. Hi Mike, Being facetious in the face of an answer that responds exactly to what you want is not very smart. 73's Richard Clark, KB7QHC |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Connect a 500 Ohm Antenna using Matching Transformer {Balun} ? -or- Antenna Pre-Selector ? | Shortwave | |||
| Matching to Crystal Filter | Homebrew | |||
| Crystal Filter Matching | Homebrew | |||
| Building a Matching Transformer for Shortwave Listener's Antenna using a Binocular Ferrite Core from a TV type Matching Transformer | Shortwave | |||
| Antenna matching | Shortwave | |||
Threaded Mode
