Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
On 8/1/2011 8:29 AM, Dave wrote:
Hello, I'm about to fix a 20 foot aluminium pole to a couple T+K standoff brackets about 1.5meters apart and standoff about 16 inchs I'm wondering what size of Rawbolts to use ?? I'm think 12mm ??? Oh yes on the pole would be a 2/70cm co-liner and a 66ft longwire on a pulley no great size or weight Any advise links would be good ! Thanks I think that 12mm will be just fine. I'm in the US and some of your terminology is a bit obscure to me, in particular "rawbolts" and "T+K standoff". But I'm bilingual, I speak inches and meters so bolts of that size should hold that short of mast up just fine if the standoffs are up to the task. John W3JXP |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
wire size | Antenna | |||
VX-2E mod for step size | Equipment | |||
VX-2E mod for step size | Equipment | |||
Try this on for size, Kevin | CB | |||
7.5 KHz Step Size: When To Use ? | Scanner |