Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
David Browne wrote:
hi just got this ant,what is the best hight to mount this at, there site says mount 8 feet, will it work better mounted 30 feet of ground thanks dave browne --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.688 / Virus Database: 449 - Release Date: 18/05/2004 Ok, I spoke to the designer this evening, and I'll pass on what I learned. He was speaking fast, as he normally does, so I'm sure I missed a lot. Roy can confirm that, and Roy can confirm that he handed over another copy of his software to him just last week. Per the designer The R7 was built because he needed a multiband antenna in the fall of 90. The R5 was used as the base idea for the design. He worked on it over late fall and winter 90/91. The antenna project was up and down 2 to 3 times a day at times. The owner of Cushcraft heard of the backyard project in spring 1991, and "asked" that it be brought to work. Tomorrow at the latest. The antenna is not a half wave antenna, it is about a 3/8 wave antenna. The impedance is approximately 250 ohms, and a roughly 4.5 to 1 transform is done. There is a series cap of 41 pF for 40m. There are 7 radials of 49 inches, because Cushcraft had tons of 49 inch 5/8 whips for 2m. The R5 had 4, this needed more. There is a false resonance on 75m or 80m, and if you put power into it at that freq, you will burn up the matching system. And, to end this argument, do not ever add radials to the system, and do not remove any of the ones it comes with. It's a touchy match. tom K0TAR |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
cushcraft 17b2 information | Antenna | |||
Anybody using Cushcraft D3 or D4? | Antenna | |||
FS: Cushcraft MA5V Ham Radio Vertical antenna | Antenna | |||
Info on Cushcraft R3 triband vertical | Antenna | |||
Cushcraft MA5B problem | Antenna |