| Home |
| Search |
| Today's Posts |
|
|
|
#1
July 8th 13, 04:54 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
300 ohm twinlead antenna.
"Wayne" wrote in message ... "tom" wrote in message ... On 6/6/2013 4:18 PM, Channel Jumper wrote: Geoffrey S. Mendelson;805681 Wrote: Take a length of 300 ohm twinlead. Short the far end, End feed one side of snip OOOOOPS.....I've got a big error in the model. Nevermind...I'll get back. |
|
#2
July 8th 13, 05:41 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
300 ohm twinlead antenna.
"Wayne" wrote in message ... "Wayne" wrote in message ... "tom" wrote in message ... On 6/6/2013 4:18 PM, Channel Jumper wrote: Geoffrey S. Mendelson;805681 Wrote: Take a length of 300 ohm twinlead. Short the far end, End feed one side of snip # OOOOOPS.....I've got a big error in the model. # Nevermind...I'll get back. OK, after correcting the error in my EZNEC model parameters, the results were too weird to have significance. |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| twinlead tuning indicators | Antenna | |||
| Twinlead antenna | Antenna | |||
| 300 ohm TV Twinlead | Antenna | |||
| twinlead question | Antenna | |||
| ANTENNA TWINLEAD FEEDER | Antenna | |||
Hybrid Mode
