Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
El 27-06-14 18:30, Ralph Mowery escribió:
wrote in message ... One ham said when he did he could tell the differance. I just don't see that going from about .4 db or less of loss to .15 db of loss on 80 meters is going to be noticed. But what when he was working on 70 centimeters instead of 80 meters? Then it would be a large difference. I should have made it clear that this is for 80 meters only, no higher band. Also he did not say what kind of differance he noticed, just that he did. Most of my work is 2 meters and higher and good transmission there is a must. I just don't have the operating time on the low bands to know if that extra .2 db would make any diffreance there. That is 2/10 of a db. Variation in propagation conditions at HF are in the tens of dB's (depending on wave and particle radiation from our sun). So you will never notice 0.2 dB. Besides the VSWR issue, I can only think of special applications/situations where screening is of prime importance. For this case, screening is the only big difference between RG213 and hardline. -- Wim PA3DJS Please remove abc first in case of PM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
New Technology Is Already Replacing Radio | Shortwave | |||
replacing a bc 200XLT | Scanner | |||
Help Re Replacing my 811A's in my Amertron Amp | Homebrew | |||
Q: Replacing RF inductors? | CB | |||
Replacing the speaker on R/S DX-398??? | Shortwave |