Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
Only the very old rotors with bad gaskets has a problem with corrosion
or water getting into the bearings. If you buy a new rotor, rob the gasket from the new rotor, take it back to Lowes, tell them there was something wrong with the rotor, get another rotor, then you will have two rotors in working condition. Oh, what a wonderful suggestion. Steal a gasket, and stick Lowes and the rotor manufacturer with the cost of refurbishing the one you plundered. Their shipping cost and personnel time will probably more than wipe out any profit they made on the rotor you bought. They may just junk the "bad" rotor rather than go to the considerable expense of "fixing" it. This is different than shoplifting, just how? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Software for antenna rotators | General | |||
Emoto Rotators | Antenna | |||
FS Yaesu G-5400B Rotators | Equipment | |||
FS Yaesu G-5400B Rotators | Equipment | |||
FS Yaesu G-5400B Rotators | Equipment |