Home |
Search |
Today's Posts |
#10
|
|||
|
|||
Remote tuner specs
bilou wrote:
wrote in message ... Wayne wrote: Those ranges of impedances are basically worthless. I don't agree :-) If I had to test such a tuner the first thing I would do is put a pure resistor of those values and try to match them accross the frequency and power range announced. Measuring the insertion loss would be nice too. Of course it is not the complete story but a good start. Which basically tells you nothing about the ability to match a complex load. I measured the impdance of a vertical to be well under the specified limits of the LDG tuner I own. However, it fails to get a match on 160 M and 17 M. The SGC tuner has no problems getting a match. -- Jim Pennino |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Remote tuner | Antenna | |||
Motor for remote controlled tuner | Antenna | |||
Remote antenna/tuner recommendations | Antenna | |||
FA: LDG RT-11 Automatic Antenna Tuner w/remote | Swap | |||
What tuner specs do I look for? | Antenna |