Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() "Darrell Gordon W4CX" wrote in message ... Group..I've just discovered this group (what took me so long?) and am impressed with the knowledge here. I am shopping for an antenna analyzer and am stymied by the choices (or lack thereof). In all of hamdom (sub $600), I only find MFJ, Autek, AEA wireless, and Kuranishi to choose from. I've checked eham reviews and found that the AEA VIA (not Bravo) rates highest...and most expensive. Probably worth it. Unfortunately, it's only good to 54Mhz, and I'd need up to 450Mhz. I know this is impossible, and would be willing to go with separate units (Autek), but they have awful reviews quality. My question: What are you guys using for HF measurements? What about V/UHF measurements? Do you recommend any particular model? How about used HP gear from ebay (yes, I know the risks). V/UHF is my priority since I'm building some copper loops for 6 and 2. What say you sage antenna gurus? Darrell W4CX Hi Darrell guru, schmuru you will find the gamut of experience and education here, though as well as some amazing flame wars I have the MFJ with 450 and it works OK Only measures SWR on 450. It's not a laboratory instrument, but I have used it for years and it gets the job done. Priceless for setting up the HF mobile. I have no comparative experience except with an old General Radio bridge in my AM radio days decades ago. 73 H. NQ5H |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
AEA Analyzer, where to buy ? | Antenna | |||
Spectrum Analyzer | Antenna |