Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
En Chuck va escriure en Mon, 27 Sep 2004 14:41:59 -0700:
There have been over 2 million copies of my freeware 'Quickyagi' downloaded, with zero (0) complaints from users. Free, isn't everything, y'know... ![]() Hi Chuck, I didn't know that program, but I'll Google for it and have a look. In any case, from it's name, I infer that it is a Yagui design/optimize program that may be very good, but only for advanced amateurs. What I was referring to, and this is what makes EZNEC special, is the posibility of "try and see". You read about, for ex., delta match and go to EZNEC and try it. You can experiment what happens if the match is too long or too short or... whatever. This is specially good to check that your design is not too critical. If you see that small differences in element construction will cause big degradation you can forget building it with real tools and materials. As for the price, effectively, free isn't everything but it helps with programs whose utility is not clear until you have used them for long enough. I know this is the shareware concept but I reckon it does not work for business. Roy's intermediate approach seems good to me: reduced but sufficient functionality for the masses and full for whoever pays it. 73's -- Toni "Auto" = prefijo griego que significa "no funciona" |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Stainless steel antenna wire | Antenna | |||
EZNEC v. 4.0 at Dayton | Antenna | |||
Adding lengths to bare wire antenna? | Antenna | |||
3 antennas modeled with EZNEC | Antenna | |||
randon wire newbie question | Antenna |