Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Anyone have the dimensions for the 4 top radials for the Hy-Gain 18AVT/WB-S.
I have downloaded the manual but no specs are on it. I assume the measurements are critical. Denis EI6HB ei6hb at eircom.net |
#2
![]() |
|||
|
|||
![]()
"Denis O' Flynn" wrote in message
... Anyone have the dimensions for the 4 top radials for the Hy-Gain 18AVT/WB-S. I have downloaded the manual but no specs are on it. I assume the measurements are critical. Denis EI6HB ei6hb at eircom.net Denis - This specific antennas has been discontinued by MFJ / Hy-Gain. An Adobe Acrobat version of this manual is available from the Hy-Gain web site. http://www.hy-gain.com/products.php?prodid=AV-18AVT http://www.hy-gain.com/man/pdf/AV-18AVT.pdf Although the original manual did not have the length of the 4 radials below the 80-meter resonator, I did see that on Page 6 of the Adobe Acrobat document -- that someone had handwritten in this data: 1/8" solid rod -- 11 1/4 inches length. Possibly an actual 18AVT owner could confirm this handwritten measurement. w9gb |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antenna tuner | Antenna | |||
Unity Gain? | Antenna | |||
Ten-tec vee beam | Antenna | |||
Reflection Coefficient Smoke Clears a Bit | Antenna | |||
Hy Gain TH3 MK3 triband Beam | Antenna |