Hi All,

I was reviewing a 75 to 50 ohm resistive matching network using two resistors,
the insertion lost was 5.7 db.

If we have a 100Vrms source with 50 ohm source impedance and it is driving a
matched 50 ohm load then the load takes 1A and the power in the load is 50
watts.

If the load is replaced with 75 ohm, then 0.8 amps will flow and the power is
48 watts. (I*I*R) == (0.8)*(0.8)*75.

I guess I must be not be taking something in account, but 2 watts does not
equal 5.7 db.

I know there must be a good reason to put the matching pad in line for the
sprectrum analyizer but I don't under why.

Thanks,

de KJ4UO