Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Dr. Slick wrote:
If you agree that the Pref/Pfwd ratio cannot be greater than 1 for a passive network, then neither can the [Vref/Vfwd]= rho be greater than 1 either. But apparently rho=(Z2-Z1)/(Z2+Z1) can be greater than unity. So those are not the same reflection coefficients. A physical rho and an image rho are quite often different values. s11 is a physical rho. Vref/Vfwd is an image rho. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Calculus not needed (was: Reflection Coefficient Smoke Clears a Bit) | Antenna | |||
A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
Reflection Coefficient Smoke Clears a Bit | Antenna | |||
Mother Nature's reflection coefficient... | Antenna |