Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Rather than cutting it, bend the dipole back on itself or bend it at an
angle to reduce space. This would not affect the antenna. Shape does not matter as much as length with antennas. Good luck, Bill, W4WNT "Tom" wrote in message om... I plan on installing a G5RV mini. Due to limited space I would need to cut off about 2 feet from the antenna. I was wondering how much would this effect the antennas performance and should I trim equal ends off the span or just take the 2 feet from one end. Thanks in advance Tom |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
G5RV 450 ohm or 300 ohm Phasing line | Antenna | |||
Layout for G5RV twin feedline? | Antenna | |||
Will my G5RV work in a this V shape | Antenna | |||
Using a G5RV on 60m | Antenna |