Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Richard,
Mine came with about a 4 x 6 inch piece of paper. No schematic. The only useful information on the paper was that it won't actually read PEP. As for the QST article, there really was no other meter that was a whole lot better. I like the 3 power ranges and the wide frequency range on the 101. (mine is the 101L) Tam/WB2TT email: mycallletters at arrldotnet "Richard Kriss" wrote in message ... I am about to do some trading and may wind up with a Daiwa CN-100 cross needle SWR/Power meter with no documentation. I could not find an online source of manual for any Daiwa products so would like to talk to someone that has one. Anybody use or have experince with the Daiwa CN 101? The QST review by Steve Ford was not that great on the peak power reading. If you will send me your address, I will send an SASE for a copy. The manual can't be very big. Dick, AA5VU |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Determining antenna resonance with a grid dip meter | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna | |||
Vee Beam info needed | Antenna | |||
Looking for info on a good triband antenna | Antenna | |||
30 meter add-on for HF2-V idea | Antenna |