Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Sun, 05 Oct 2003 15:50:41 -0700, Jack Twilley
wrote: The antenna has two elements for a flat 40m dipole and two elements for an "inverted vee" 20m dipole. I have two additional elements for an "inverted vee" 10m dipole, but those are not yet installed. The antenna rests on four eight-foot "sturdy stakes" from Home Depot, which are strapped with hose clamps to existing iron clothesline poles. The resulting height for the 40m dipole is about thirteen feet but the feedpoint hangs at about nine feet. I plan on using another sturdy stake to lift the feedpoint up to the same height as the rest of the supports. Nice job -- which department has the "sturdy stakes"? Bob k5qwg Thanks for all the hard work and encouragement. Jack. |
#2
![]() |
|||
|
|||
![]()
=2D----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1 "Bob" =3D=3D Bob Miller writes: [...] Bob Nice job -- which department has the "sturdy stakes"? They were in the gardening department. They're used for tomatoes and other plants. They are about an inch in diameter and made of green plastic with an iron core. Bob Bob k5qwg Jack. =2D --=20 Jack Twilley jmt at twilley dot org http colon slash slash www dot twilley dot org slash tilde jmt slash =2D----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQE/gQBZGPFSfAB/ezgRAnxKAKCzWeEmiMDmjV87RhKts4xTP0OmvQCfchMG gp8IjwEvU1ow2QgzHWbwHd4=3D =3DAIHq =2D----END PGP SIGNATURE----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
EH antenna, FCC certification is arrived | Antenna | |||
Ten-tec vee beam | Antenna | |||
Compact HF antenna (RX-only) for reference in antenna tests? | Antenna | |||
Off Center Fed Dipole: Windom HSQ | Antenna | |||
50 Ohms "Real Resistive" impedance a Misnomer? | Antenna |