Home |
Search |
Today's Posts |
#15
![]() |
|||
|
|||
![]()
On 23 Feb 2005 09:53:05 -0800, "Dave" wrote:
Done and done... nice program! I'm hoping I entered the correct values for everything. Do the patterns listed below look correct? Hi Dave, Yes, however, you will notice there is still a cone of silence above any of these even if the preferred angle is now higher towards a balloon. I assumed things like wire diameter (I used 2mm) didn't affect the output significantly... although I did notice some things like the number of segments did affect the output if I decreased them (I used 10 for these cases). Not so much that any change will fill in the cone. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Antenna Advice | Shortwave | |||
Make your own T2FD | Shortwave | |||
FS: Connectors/Adapters/Meters/Etc. | Equipment | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |