Roy Lewallen wrote:
Simpfeed program which takes EZNEC (or other modeling program) reported
feedpoint impedances as its input (no mutual Z calculation necessary)
and calculates the feedline lengths necessary for proper phasing. Click
the Simpfeed link at that same URL to get it.

Sorry, I wasn't reading closely enough and was looking for
it on your web page. I found it.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---