Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 30th 05, 04:56 AM
John Smith
 
Posts: n/a
Default

Last night I had a dream...

I snuck out to investigate a large and strange building on the outskirts of
the city, this building covered four city blocks!
When I peeked in one window, I seen two vaccume tubes, each was the size of
house!
The window was cracked, though the crack I overheard two engineers talking,
one must have been new, as the other was explaining to him that the equip
was a 100 megawatt xmitter! It was a 60 cycle transmitter. He pointed to
the rear of the tubes, at a LARGE balun which fed lines leaving the
building. He explained that the balun was properly loaded when a certain
voltage was on the plates, and there was a large, variable dummy load which
controlled the voltage on the plates, and that the input power could also be
varied, as this xmitter was used as a "constant voltage souce."
The lines which left the building went to supply homes with the transmitter
power. At each home the power was consumed by many individual "baluns",
which matched the impedance of the line to a device on the secondary of the
balun. Also, many dummy loads (light bulb, resistance heating devices,
etc.) existed in these homes. And, there were even devices who's impedance
matched that of the lines directly, but contained additional resistance to
limit the current they consumed...

Then I woke up!!! grin

Regards,
John


  #2   Report Post  
Old April 30th 05, 04:58 AM
John Smith
 
Posts: n/a
Default

vacuum even!!!!

john


  #3   Report Post  
Old April 30th 05, 05:11 AM
John Smith
 
Posts: n/a
Default

.. Usually, I reread posts, the above-I did not, I am sure you noticed.

Such as where the constant voltage on the plates should have said, "Constant
voltage on the secondary of the balun" etc.

But, overlook the errors; you'll get the jest of it.



Regards,

John


  #4   Report Post  
Old April 30th 05, 07:04 PM
John Smith
 
Posts: n/a
Default

Errr, notice in the above thread, to my favor, I DID say "jest" and NOT
"gist" !!!

grin

Warmest regards,
John


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Power supply common emitter SMJ Homebrew 8 March 2nd 05 02:29 AM
K0HB Supports Common Sense...YES! [email protected] Policy 0 December 27th 04 10:09 PM
Non-radiating Feedlines? Richard Fry Antenna 22 June 15th 04 04:29 AM
What Do Twistedhed and Dave Hall have in common? Citizens For A Keyclown-Free Newsgroup CB 5 December 30th 03 10:41 PM
Common sense applied Ragnar Otterstad Dx 0 December 3rd 03 10:52 AM


All times are GMT +1. The time now is 12:52 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017