Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I have used that tape, or a product just like it--but prefer the epoxy...
you can work it like clay--strong as steel and apparently excellent insulating qualities... wonderful stuff really... Warmest regards, John -- If "God"--expecting an angel... if evolution--expecting an alien... just wondering if I will be able to tell the difference! "Atec" wrote in message ... | John Smith wrote: | There is a two-component epoxy putty, I have used this to | water-proof/weather-proof different kludges of mine--even to construct | standoff, insulators and unique hardware bits... my latest stash came from | the 99-cent store... "bondo" can also be used from autosupply stores (used | to fill dents in auto bodies) with good success (strength is somewhat | less)... | | Warmest regards, | John | You need to buy a roll of cablers seal , sold under different names but | its essentially butyl rubber tape that pressure seal when rapped , only | a few bucks a roll and lasts a decade ( sticks really well but try to | remove it ) |
#2
![]() |
|||
|
|||
![]()
John Smith wrote:
I have used that tape, or a product just like it--but prefer the epoxy... you can work it like clay--strong as steel and apparently excellent insulating qualities... wonderful stuff really... Warmest regards, John I dislike it ('poxy), but whatever . |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Had to fix my TS440SAT, cracked solder joints on a transistor | Homebrew | |||
Warning -- bad new type of solder flux | Boatanchors | |||
CHEAP SONY 2010 REPAIR | Shortwave | |||
sn96.3 ag3.7 solder qstn | Boatanchors | |||
Have You Been Harmed By Lead Solder? | Equipment |