Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Yagi for 448or so mhz
I would like to build a yagi for 448 mhz rangr for home use I have a 12 foot
1x1" piece of cedar and some 10 gauge copper wire It measures 0.15625" I think it is 10 gauge. Am I wasting my time? Also how do I use 75 ohm line as a feed line? All the plans I have found are for 50 ohm feedlines. It is all I have for wire and living out in the boonies it is difficult to travel to pick up some 50 ohm. I'm on a budget / disabled and would appreciate any help/ knowledge/links/donations on this. I own the ARRL Antenna book 20th edition and find it to be a bit overwhelming so far. Cheers, Ryan |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SUPER J-POLE BEATS YAGI BY 1 dB | Antenna | |||
GP -> yagi driven element? | Antenna | |||
FS: 6m yagi and 2m/70cm yagi | Swap | |||
Yagi, OWA and Wideband Yagi etc etc | Antenna | |||
Quad vs Yagi (or log) | Antenna |