Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
That being the case, can I just keep folding back a 120 foot insulated wire
dipole until it is say 5 or 6 foot long and it will still be resonant on the original frequency? "Dave" wrote in message ... if it is insulated wire it must be cut, if its not then it doesn't. though you will see some effect of folding it back even with insulated wire it won't be the same as cutting the wire shorter. "wb5cys" wrote in message m... Considering a wire dipole (or inverted V) does bending the end of a leg back and wrapping it around itself electrically shorten the antenna or must it be cut in order to change the resonant frequency? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FCC: Broadband Power Line Systems | Policy | |||
MilAir Monitoring from KeyWest - Lots of Comms! | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Scanner | |||
North-Central Florida Mil Logs 9/10/2003 & 9/11/2003 | Shortwave | |||
North-Central Florida Mil Logs 9/3/2003 | Scanner |