Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Wes Stewart" wrote in message ... On Tue, 26 Jul 2005 20:25:50 -0000, "Dave" wrote: use the one that reaches. don't read any more replies, go do the job, put up the antenna and get on the air. if you come back here and read all the messages that this question will generate you will never get on the air! Yes, remember ignorance is bliss. Follow Dave's advice; even better though, never ask a question here at all. That way, you can spend more time on the air and that is more important than possibly learning something about antennas and transmission lines. that of course was not my point... in his case either wire would be fine and there is no point in discussing which one to use and how to cut it to the n-th degree as some people do on here. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Determining SWR and Transmission Line Losses | Antenna | |||
FCC: Broadband Power Line Systems | Policy | |||
Folded monopole dilemma | Antenna | |||
Folded monopole dilemma | Antenna | |||
Complex line Z0: A numerical example | Antenna |