No no. The bikes are enhancing the overall experience. It's the _cars_
that are creating a hazard.

Fred W4JLE wrote:

Yep, you folks spend a fortune to get a bike 10 pounds lighter, then carry
around a 20 pound chain to keep people from stealing it!

Every other sport takes place on a field designed for the sport. You guys
for the most part ride on the highways creating a hazard.

"Ham op" wrote in message
...

It's obvious that Fred doesn't ride. My bike costs more than many HF
rigs !!!

BTW, in a crash, the BNC should break apart and have the coax tear out.
Solution, carry a cell phone and leave the radio at the shack!

I carry a 2/440 HT.

+ + +

Fred W4JLE wrote:

I told Lance, and now I will tell you, if you get in my way in your

little

faggoty outfits and goofy helmets, I will run your ass over. Don't

worry, I

will call 911 and let them know where to pick up your traffic blocking

body.


"Ken Bessler" wrote in message
news:QrPHe.35144$Eo.25151@fed1read04...


I'm looking for an antenna connector with the following
idea:

I want to mount a spare 2m/440 mobile antenna on my
race bike and use my FT-51R ht on my belt with the
deluxe remote mic on the handlebars.

Problem is that if I wreck, the radio will want to stay on
my belt but the coax going to the antenna won't! The mic
connector will pull out but the antenna connector (BNC)
will stay until something breaks. If I wreck, I may need my
HT to call for assistance (it's happened once before) I
need an inepensive 50 ohm pair of connectors that will slide
apart when pulled. Kinda like a push on F fitting but for
50 ohm RG-58 cable.

The only ones I've thought of are the F fitting or an RCA
connection. Anybody know the impedance of an RCA plug?

Are there push on BNC or 259 connectors? Cost matters.

--
Just my 2¢... 73 es gd dx de Ken KGØWX
Grid EM17ip, Flying Pigs #-1055
Proud builder & owner of Elecraft K2 #4913









--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com