LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #16   Report Post  
Old August 16th 05, 04:39 AM
Bob Nielsen
 
Posts: n/a
Default

Back around 1962, I was working on the Syncom satellite program at Hughes
Aircraft. NASA wanted us to make some satellite transponder simulators so
they could check out the ground stations. The plan was to take some of
the 'less than perfect' hardware and package it up in a metal box.
Unfortunately a lot of that stuff wasn't very stable, particularly the
varactor multipliers. To make things worse, they used TWT amplifiers
(in a separate box) followed by a 10 watt attenuator which brought the
output back down to about the same level as the drive to the TWT. We
ended up lining the boxes with steel wool along with a lot of metal
tape to seal the seams, etc., and it did seem to help (a bit).

I remember the steel-wool balun story and wondered at the time if perhaps
it was merely absorbing some of the current on the outside of the coax.

73, Bob N7XY

On Sun, 14 Aug 2005 23:34:48 -0400, Fred W4JLE wrote:

Walt, I just went back and checked some old notes. I show I wrote a letter
to the editor on the steel wool balun in 1977. I know Roy said 1993, but I
"Walter Maxwell" wrote in message
...
On Sat, 13 Aug 2005 18:00:21 -0400, "Fred W4JLE"
wrote:

You might be an old time if you can answer the following, with out diving
into your library.

Which of the following is NOT a rectifier?
a. 3B24
b. 80
c. 3C24
d. 6H6

Steel wool was once touted as a good material to make which of the
following?

a. Choke Balun
b. AF shielding
c. Linear capacitors
d. Radials for short virticals

Feel free to add your own favorite...


Good ones, Fred, 3B24 and 3C24 are not rectifiers.

However, some moron claimed in QST that steel wool was just as good as
ferrite for making choke baluns, but I've forgotten who the lunkhead
at the League was who believed him, and allowed stupid idea to be
published.

I complained to the League editors, who unbelieveably said 'Prove It'.
So I bought some steel wool and made two back to back baluns with it
and made measurements of common mode currents. The measurements proved
that the steel wool had absolutely no choking effect.

I reported the results of the measurements to the editors at the
League, but I can't remember whether they did anything about refuting
the original incorrect material. Perhaps your memory is better than
mine on this issue.

Walt, W2DU



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA: GE Mastr2 Time Out Timer pm Swap 0 February 2nd 05 01:43 AM
what portable would a old timer dxr buy for dxing and shortwave?? roystr Shortwave 15 December 11th 04 09:04 PM
Old Timer is a Newb again! Explain Trunking and Digital PLEASE! Katmandu Scanner 1 December 1st 04 12:08 AM
12 v timer project ... need ideas! J999w Homebrew 12 January 7th 04 05:43 AM
12 v timer project ... need ideas! J999w Homebrew 0 December 31st 03 10:12 PM


All times are GMT +1. The time now is 04:47 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017