the freq will be 1700. not much power not over 5 watts also i am in the
country only a few people live around me so i can crank up the power lol
thanks for the info

On Wed, 24 Aug 2005 01:50:03 -0500, (Pirate Radio)
wrote:

the freq will be 1700. not much power not over 5 watts also i am in the
country only a few people live around me so i can crank up the power lol
thanks for the info

Lemme see.... At 1700 KHz I would say that the optimum filter would
be a piece of copper strap about 1/4" wide and 1/2" long placed right
across the output of the transmitter.

Stop back sometime and let us know how this works out.

On Wed, 24 Aug 2005 01:50:03 -0500, (Pirate Radio)
wrote:

the freq will be 1700. not much power not over 5 watts also i am in the
country only a few people live around me so i can crank up the power lol
thanks for the info

Scarcely seems like a "Part 15" AM station under those conditions?

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

well almost part 15.

Pirate Radio wrote:
well almost part 15.

Inasmuch as it's unlicensed!
--
Chris Cox, N0UK/G4JEC NIC Handle: CC345
If at first you don't succeed, skydiving is not for you.

"see sea oh ecks at you aitch see dot comm"
wrote in message ...
Pirate Radio wrote:
well almost part 15.

Inasmuch as it's unlicensed!
--
Chris Cox, N0UK/G4JEC NIC Handle: CC345
If at first you don't succeed, skydiving is not for you.

May I suggest that you direct your enquiry to the nearest FCC office. I'm
sure they will be very keen to help you!

Pirate Radio wrote:

well almost part 15.


Meaning not. Which is the important part.

tom
K0TAR

ok guys the station is on the air i set the freq on 1700. and a very
long wire ant . about 20 ft high over 100ft of wire damm took most of
the day to set the post in i could only put in a big loop had my other
pirate pal to help me take care out there in radio land from alabama
radio

100 foot of wire on 1700Khz is not a correct length antenna. It is unlikely
that your "part 15" device is matched to the new antenna, and may be worse
than the legal antenna that came with it.

You did not mention what you were using as RF ground.


"Pirate Radio" wrote in message
...
ok guys the station is on the air i set the freq on 1700. and a very
long wire ant . about 20 ft high over 100ft of wire damm took most of
the day to set the post in i could only put in a big loop had my other
pirate pal to help me take care out there in radio land from alabama
radio

PR:

Explore 1/2 wave antennas, you can load then with an inductance(s) to
achieve the 1/2 wave electrical length, and they will work against a
minimal counterpoise (chain fence, spare travel trailer you have parked
around, metal shed, etc, etc....)

Long, long ago I ran a pirate am broadcast station using an old 50 ft. tv
mast with loading coils and a heavily modified gamma match which used
loading coils in its construction, was able to be heard for over 100 miles
in the most favorable direction running 100+ watts though an old military
transmitter... back then there were many pirate stations around...

John

On Sat, 27 Aug 2005 01:45:00 -0500, Pirate Radio wrote:

ok guys the station is on the air i set the freq on 1700. and a very
long wire ant . about 20 ft high over 100ft of wire damm took most of
the day to set the post in i could only put in a big loop had my other
pirate pal to help me take care out there in radio land from alabama
radio