On Sat, 01 Oct 2005 20:30:52 -0500, Buther Boy wrote:

Howard:

I read the article, and would really appreciate it if you would please
simplify construction AND installation for me. Step by step, where
applicable and if possible.

Many thanks in advance. :-)

Buther Boy

Buther,
I'm going to refer you to another website that has further explained
it and offers some illustrations - a picture is worth.......

Yes, it's a bit of laziness on my part and also an admission that I'm
not so hot at writing instructions. A few tips though:
1) Insulators; wire antenna attached to one hole, rope to the other -
the rope ties off to a support such as a mast, tree or house.
2) Lead in wire/transmission line; the wire can come directly to the
house but can pick up lots of noise, using coaxial cable (and a
suitable ground) can help reduce this - attach the center conductor to
the antenna and the shield (braided wire just under the plastic
jacket) to ground. if for listening only go ahead and use 75 ohm
cable as you would buy for your cable or satellite TV system.
3) Ground; a metal rod, typically 8 feet long, driven into the ground;
you can use the ground rod for your home electrical.
4) Keep your antenna as far from power lines as you can and
perpendicular to the power lines (if nearby) can help to reduce noise
vs parallel to them.

Here's the site promised: http://www.kc7nod.20m.com/random_wire.htm
Thanks to KC7NOD for taking the time to put this info on his site.
Also, don't forget that Google is your friend, type in 'random wire
antenna' and you will receive a wealth of other info.

Howard