Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
"David" wrote in message
... Thank you to whoever provided the coordinates for the model of this antenna. I wrote them down and entered them when I saw them in your posting but the original email has been automatically removed from the folder in my email client. There has been a lot of discussion and side issues raised from my original post but I am grateful for you taking the time to provide the information for me. I am a novice with regard to antenna theory and have no previous experience with antenna modeling. Your post has given me a good starting point. I entered the coordinates and (beside initially selecting wavelengths instead of inches) the model ran fine. I was then able to scale it up to the frequency of interest (920 MHz) and now I am playing with the sleeve diameter, sleeve length and radiator length to observe how these are effecting radiation pattern and SWR. There was also mention of a book regarding basic antenna modeling, my next step will be to purchase a good book to help me understand the process and limitations etc. Thanks again Regards David Huisman I recommend Cebik's book from www.nittany-scientific.com. The ARRL modeling course is probably similar, since Cebik was also involved in its development. Regards, Frank |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Make your own T2FD | Shortwave | |||
Mobile Ant L match ? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Outdoor Antenna and lack of intermod | Scanner |